DescriptionThe elevating knee crank is made of stainless steel, which is more heat-resistant, and wear-resistant. The elevating knee crank with the one-piece casting doesn't have slits on the whole, so it is uneasy to break during operation. This combination of gearshaft clutch, the elevating knee crank, and the handle can effectively lift and lower the milling machine. It is suitable for all kinds of milling machines.DetailsNine-tooth Clutch: The nine-tooth clutch can be tightly connected to the notches of the crank. The clutch is not easily dislodged from the crank when the crank is turned.Screw Connection Port: The handle with the screw connection port can be tightly connected to the elevating knee crank, so the handle is not easily dislodged from the crank.ApplicationIt is suitable for all kinds of milling machines.SpecificationColor: Silver, BlackProduct Material: Stainless SteelMilling Machine Lifting Crank: 9 TeethInner Diameter: 27.5mm/1inchInner Hole: 16mm/0.6inchOuter Diameter: 39.5mm/1.6inchPacking Size: 8.8*8.8*26.5cm/3.5*3.5*10.4inchPackage Weight: 1.12kg/2.5lbsPackage Included1 x Elevating Knee Crank 1 x Gearshaft Clutch1 x HandleNotesPlease allow the slight color difference caused by the shooting light and 1-3 mm error due to manual measurement, and make sure you do not mind before ordering.